Kofferset1931
IT Lager / Haushalt
1Live-Katalog
1 Stk. Grafikkarte Quadro K2200 4GB PCIe 2.0 (NVIDIA)
Artikel Nr: 628.082
Der NVIDIA® Quadro® K2200 bietet eine außergewöhnlich energieeffiziente Leistung für 3D-Anwendungen. 4 GB GDDR5 GPU-Speicher mit hoher Bandbreite ermöglichen die Erstellung großer, komplexer Modelle, und der flexible Single-Slot-Formfaktor macht ihn selbst mit den meisten platz- und stromsparenden Gehäusen kompatibel. Außerdem steuert eine völlig neue Display-Engine bis zu vier Bildschirme mit DisplayPort 1.2-Unterstützung für ultrahohe Auflösungen von bis zu 3840 x 2160 bei 60 Hz und 30-Bit-Farbe.
Details
Artikel Nr: 628.082
Der NVIDIA® Quadro® K2200 bietet eine außergewöhnlich energieeffiziente Leistung für 3D-Anwendungen. 4 GB GDDR5 GPU-Speicher mit hoher Bandbreite ermöglichen die Erstellung großer, komplexer Modelle, und der flexible Single-Slot-Formfaktor macht ihn selbst mit den meisten platz- und stromsparenden Gehäusen kompatibel. Außerdem steuert eine völlig neue Display-Engine bis zu vier Bildschirme mit DisplayPort 1.2-Unterstützung für ultrahohe Auflösungen von bis zu 3840 x 2160 bei 60 Hz und 30-Bit-Farbe.
Details
1 Stk. Grafikkarte FireGL V3100 (NVIDIA)
Artikel Nr: 628.083
The FireGL V3100 was a professional graphics card by ATI, launched on September 1st, 2004. Built on the 110 nm process, and based on the RV370 graphics processor, in its RV370 GL variant, the card supports DirectX 9.0. Since FireGL V3100 does not support DirectX 11 or DirectX 12, it might not be able to run all the latest games. The RV370 graphics processor is a relatively small chip with a die area of only 74 mm² and 107 million transistors. It features 4 pixel shaders and 2 vertex shaders, 4 texture mapping units, and 4 ROPs. Due to the lack of unified shaders you will not be able to run recent games at all (which require unified shader/DX10+ support). ATI has paired 128 MB DDR memory with the FireGL V3100, which are connected using a 64-bit memory interface. The GPU is operating at a frequency of 391 MHz, memory is running at 196 MHz. Being a single-slot card, the ATI FireGL V3100 does not require any additional power connector, its power draw is not exactly known. Display outputs include: 1x DVI, 1x VGA. FireGL V3100 is connected to the rest of the system using a PCI-Express 1.0 x16 interface
Details
Artikel Nr: 628.083
The FireGL V3100 was a professional graphics card by ATI, launched on September 1st, 2004. Built on the 110 nm process, and based on the RV370 graphics processor, in its RV370 GL variant, the card supports DirectX 9.0. Since FireGL V3100 does not support DirectX 11 or DirectX 12, it might not be able to run all the latest games. The RV370 graphics processor is a relatively small chip with a die area of only 74 mm² and 107 million transistors. It features 4 pixel shaders and 2 vertex shaders, 4 texture mapping units, and 4 ROPs. Due to the lack of unified shaders you will not be able to run recent games at all (which require unified shader/DX10+ support). ATI has paired 128 MB DDR memory with the FireGL V3100, which are connected using a 64-bit memory interface. The GPU is operating at a frequency of 391 MHz, memory is running at 196 MHz. Being a single-slot card, the ATI FireGL V3100 does not require any additional power connector, its power draw is not exactly known. Display outputs include: 1x DVI, 1x VGA. FireGL V3100 is connected to the rest of the system using a PCI-Express 1.0 x16 interface
Details
2 Stk. Qlogic QMH2462 Dual 4Gb Fibre FC Adapter (HP)
Artikel Nr: 628.093
The QLogic QMH2462 4Gb FC HBA is a dual channel PCI Express mezzanine form factor card specifically designed for c-Class BladeSystem server blades. Operating systems supported include Windows and Linux. This HBA is qualified for use in all c-Class blade servers. It is optimized for HP StorageWorks as well as supported by third-party SAN vendors.
Details
Artikel Nr: 628.093
The QLogic QMH2462 4Gb FC HBA is a dual channel PCI Express mezzanine form factor card specifically designed for c-Class BladeSystem server blades. Operating systems supported include Windows and Linux. This HBA is qualified for use in all c-Class blade servers. It is optimized for HP StorageWorks as well as supported by third-party SAN vendors.
Details
2 Stk. NC364M 4GB ADAPTER (HP)
Artikel Nr: 628.094
Transmissionrate: 1000 Mbps Type: Interface Card
Details
Artikel Nr: 628.094
Transmissionrate: 1000 Mbps Type: Interface Card
Details
3 Stk. Qlogic QMH2462 Fibre Channel HBA (HP)
Artikel Nr: 628.095
The QLogic QMH2462 4Gb FC HBA is a dual channel PCI Express mezzanine form factor card specifically designed for c-Class BladeSystem server blades. Operating systems supported include Windows and Linux. This HBA is qualified for use in all c-Class blade servers. It is optimized for HP StorageWorks as well as supported by third-party SAN vendors.
Details
Artikel Nr: 628.095
The QLogic QMH2462 4Gb FC HBA is a dual channel PCI Express mezzanine form factor card specifically designed for c-Class BladeSystem server blades. Operating systems supported include Windows and Linux. This HBA is qualified for use in all c-Class blade servers. It is optimized for HP StorageWorks as well as supported by third-party SAN vendors.
Details
2 Stk. HPE Flex-10 10Gb 2-port 530M Adapter (HP)
Artikel Nr: 628.096
The HPE 530M is a 2-port 10GbE Mezzanine adapter, featuring the next generation of 10 Gb Ethernet offering in a single chip solution on a mezzanine form factor that further reduces power requirements for 2 ports of 10 Gb Ethernet. It is designed for use with HPE BladeSystem c-Class Gen8 blade server platforms type A and Type B mezzanine slots. It provides full duplex high performance Ethernet connectivity with support for HPE Virtual Connect Flex-10 blade interconnect and Network Partitioning (NPAR) technology, allowing each 10GbE port to be divided into four physical NICs and optimize bandwidth management for virtualized servers. The HPE Flex-10 530M adapter, in conjunction with HPE Virtual Connect Flex-10 and NPAR technology, helps to extend the benefits of virtualization beyond the server and into the rest of the infrastructure. The HPE 530M supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Tunnel Offloads (NVGRE VXLAN), Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization features such as SR-IOV (Windows, Linux, VMware)), VMware NetQueue and Microsoft VMQ.
Details
Artikel Nr: 628.096
The HPE 530M is a 2-port 10GbE Mezzanine adapter, featuring the next generation of 10 Gb Ethernet offering in a single chip solution on a mezzanine form factor that further reduces power requirements for 2 ports of 10 Gb Ethernet. It is designed for use with HPE BladeSystem c-Class Gen8 blade server platforms type A and Type B mezzanine slots. It provides full duplex high performance Ethernet connectivity with support for HPE Virtual Connect Flex-10 blade interconnect and Network Partitioning (NPAR) technology, allowing each 10GbE port to be divided into four physical NICs and optimize bandwidth management for virtualized servers. The HPE Flex-10 530M adapter, in conjunction with HPE Virtual Connect Flex-10 and NPAR technology, helps to extend the benefits of virtualization beyond the server and into the rest of the infrastructure. The HPE 530M supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Tunnel Offloads (NVGRE VXLAN), Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization features such as SR-IOV (Windows, Linux, VMware)), VMware NetQueue and Microsoft VMQ.
Details
2 Stk. HPE Flex-10 10Gb 2-port 530M Adapter (HP)
Artikel Nr: 628.097
The HPE 530M is a 2-port 10GbE Mezzanine adapter, featuring the next generation of 10 Gb Ethernet offering in a single chip solution on a mezzanine form factor that further reduces power requirements for 2 ports of 10 Gb Ethernet. It is designed for use with HPE BladeSystem c-Class Gen8 blade server platforms type A and Type B mezzanine slots. It provides full duplex high performance Ethernet connectivity with support for HPE Virtual Connect Flex-10 blade interconnect and Network Partitioning (NPAR) technology, allowing each 10GbE port to be divided into four physical NICs and optimize bandwidth management for virtualized servers. The HPE Flex-10 530M adapter, in conjunction with HPE Virtual Connect Flex-10 and NPAR technology, helps to extend the benefits of virtualization beyond the server and into the rest of the infrastructure. The HPE 530M supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Tunnel Offloads (NVGRE VXLAN), Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization features such as SR-IOV (Windows, Linux, VMware)), VMware NetQueue and Microsoft VMQ.
Details
Artikel Nr: 628.097
The HPE 530M is a 2-port 10GbE Mezzanine adapter, featuring the next generation of 10 Gb Ethernet offering in a single chip solution on a mezzanine form factor that further reduces power requirements for 2 ports of 10 Gb Ethernet. It is designed for use with HPE BladeSystem c-Class Gen8 blade server platforms type A and Type B mezzanine slots. It provides full duplex high performance Ethernet connectivity with support for HPE Virtual Connect Flex-10 blade interconnect and Network Partitioning (NPAR) technology, allowing each 10GbE port to be divided into four physical NICs and optimize bandwidth management for virtualized servers. The HPE Flex-10 530M adapter, in conjunction with HPE Virtual Connect Flex-10 and NPAR technology, helps to extend the benefits of virtualization beyond the server and into the rest of the infrastructure. The HPE 530M supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Tunnel Offloads (NVGRE VXLAN), Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization features such as SR-IOV (Windows, Linux, VMware)), VMware NetQueue and Microsoft VMQ.
Details
2 Stk. HPE QMH2672 16Gb FC HBA for BladeSystem c-Class (HP)
Artikel Nr: 628.098
Recommended SKU - This adapter is a recommended option that has been selected by HPE experts to provide the right technology for a range of workloads and market segments offering the best combination of performance, value and availability. The QMH2672 16Gb FC HBA is a dual channel Fibre Channel mezzanine card that provides reliable, high-performance connectivity at 8Gb/s or 16Gb/s. This is a Type A mezzanine card for HPE BladeSystem c-Class that is compatible with HPE ProLiant Server blades starting with Gen8. All HPE 8 Gb and 16 Gb Fibre Channel Interconnects for BladeSystem c-Class are supported by the QMH2672. It is optimized for HPE and is also supported by third-party SAN vendors
Details
Artikel Nr: 628.098
Recommended SKU - This adapter is a recommended option that has been selected by HPE experts to provide the right technology for a range of workloads and market segments offering the best combination of performance, value and availability. The QMH2672 16Gb FC HBA is a dual channel Fibre Channel mezzanine card that provides reliable, high-performance connectivity at 8Gb/s or 16Gb/s. This is a Type A mezzanine card for HPE BladeSystem c-Class that is compatible with HPE ProLiant Server blades starting with Gen8. All HPE 8 Gb and 16 Gb Fibre Channel Interconnects for BladeSystem c-Class are supported by the QMH2672. It is optimized for HPE and is also supported by third-party SAN vendors
Details
2 Stk. HP NC326m PCI-e DUAL PT 1GB ADPT c-Class (HP)
Artikel Nr: 628.099
The NC326m is a dual-port Gigabit Ethernet, x4 PCI Express type 1 mezzanine option for HP BladeSystem c-Class servers. The NC326m is ideal for virtualization, security, server consolidation, network segmentation, and other ProLiant server applications requiring additional throughput and port density.
Details
Artikel Nr: 628.099
The NC326m is a dual-port Gigabit Ethernet, x4 PCI Express type 1 mezzanine option for HP BladeSystem c-Class servers. The NC326m is ideal for virtualization, security, server consolidation, network segmentation, and other ProLiant server applications requiring additional throughput and port density.
Details
2 Stk. HP NC326m PCI-e DUAL PT 1GB ADPT c-Class (HP)
Artikel Nr: 628.100
The NC326m is a dual-port Gigabit Ethernet, x4 PCI Express type 1 mezzanine option for HP BladeSystem c-Class servers. The NC326m is ideal for virtualization, security, server consolidation, network segmentation, and other ProLiant server applications requiring additional throughput and port density.
Details
Artikel Nr: 628.100
The NC326m is a dual-port Gigabit Ethernet, x4 PCI Express type 1 mezzanine option for HP BladeSystem c-Class servers. The NC326m is ideal for virtualization, security, server consolidation, network segmentation, and other ProLiant server applications requiring additional throughput and port density.
Details
1 Stk. Prescision T1700 (Dell)
Artikel Nr: 628.132
Intel e3-1240 v3, 32 GB RAM, Windows 10 Pro, Nvidia Quadro K2000, 512GB SSD
Details
Artikel Nr: 628.132
Intel e3-1240 v3, 32 GB RAM, Windows 10 Pro, Nvidia Quadro K2000, 512GB SSD
Details
1 Stk. HP Z Display Z24i (HP)
Artikel Nr: 628.141
24" 1920 x 1200 (WUXGA) VGA, DVI-D, DisplayPort IPS
Details
Artikel Nr: 628.141
24" 1920 x 1200 (WUXGA) VGA, DVI-D, DisplayPort IPS
Details
1 Stk. HP Z Display Z24i (HP)
Artikel Nr: 628.142
24" 1920 x 1200 (WUXGA) VGA, DVI-D, DisplayPort IPS
Details
Artikel Nr: 628.142
24" 1920 x 1200 (WUXGA) VGA, DVI-D, DisplayPort IPS
Details
1 Stk. HP Z Display Z24i (HP)
Artikel Nr: 628.143
24" 1920 x 1200 (WUXGA) VGA, DVI-D, DisplayPort IPS
Details
Artikel Nr: 628.143
24" 1920 x 1200 (WUXGA) VGA, DVI-D, DisplayPort IPS
Details
1 Stk. HP Z Display Z24i (HP)
Artikel Nr: 628.144
24" 1920 x 1200 (WUXGA) VGA, DVI-D, DisplayPort IPS
Details
Artikel Nr: 628.144
24" 1920 x 1200 (WUXGA) VGA, DVI-D, DisplayPort IPS
Details
1 Stk. Boiler SH120 AE (Stiebel Elteon)
Abweichender Standort: Kapellen Strasse 32, 8020 Graz
Artikel Nr: 628.147
Details
Abweichender Standort: Kapellen Strasse 32, 8020 Graz
Artikel Nr: 628.147
Details
1 Stk. Backform - Schichtkuchen
Artikel Nr: 628.153
Geschirrspülerfest - 230Grad - Silikon
Details
Artikel Nr: 628.153
Geschirrspülerfest - 230Grad - Silikon
Details
1 Stk. Strunkentferner (WMF)
Artikel Nr: 628.160
für welche auch immer, Apfel oder Paprika
Details
Artikel Nr: 628.160
für welche auch immer, Apfel oder Paprika
Details
1 Stk. Top Teigportionierer
Artikel Nr: 628.164
zum gleichmäßigen Dosieren und Spritzen von Rührteig
Details
Artikel Nr: 628.164
zum gleichmäßigen Dosieren und Spritzen von Rührteig
Details
1 Stk. Handtasche (Valentino)
Artikel Nr: 628.180
Original - BAGS BONGO Pattina Lack - neu
Details
Artikel Nr: 628.180
Original - BAGS BONGO Pattina Lack - neu
Details
